Question about HP OfficeJet Office Equipment & Supplies
...top and the glass. 1-assuming you are using the feeder to fax,copy or scan (the part that automatically picks up the paper) it comes out with a streak. Make a copy putting the paper on the glass and ...
top feeder ) there is an assembly which u can lift , there wud be a set of rollers if u lift that part there would be a glass strip . u are suppose to clean that strip . While holding up the inside of
Question about HP OfficeJet Office Equipment & Supplies
...feeder scans two streaks from the top to the bottom of the page. I have asked and looked around for something to clean the rollers but have had no luck. 2. When I print documents, the letters do not ...
Question about HP OfficeJet Office Equipment & Supplies
...top panel but that doesn't help. The key to solving this problem lies in what you observed. It only happens when you use the document feeder. As you noted, when you place it on the glass, there is no ...
Question about HP OfficeJet Office Equipment & Supplies
...top feeder; doesn't happen when on flatbed streaks on copies when original is fed through Imageclass MF 4694 top feeder; doesn't happen when on flatbed There is dirt on the ADF glass. ...
...TOP FEEDER AND NOT FROM PRINTNG TO COPIER OR IF YOU PUT A COPY ON THE GLASS UNDER THE DOC FEEDER AND NO LINES APEAR CHECK THE SMALL GLASS WINDOW UNDER THE DOC FEEDER THERE MAY BE SOME TIPEX OR INK ...
Question about HP OfficeJet Office Equipment & Supplies
...then you probably need a drum unit. if internal reports look good, then lift the feeder on top of machine, and cleaned the little, narrow piece of glass to the left of your big glass. hth, ...
Question about HP OfficeJet Office Equipment & Supplies
...feeder? If so, there is something on the strip of glass where the page is scanned. Open the top to reveal the large glass area. Then open the part where the paper feeds in when using the document ...
Question about Office Equipment & Supplies
feeder reads the page. Lift the top cover where the pases feed thru and you should see a thin strip of glass right next to the main large glass. Clean this surface with a soft cloth and class cleaner,
...top of the glass thats where auto doc feeder scan from, or the imaging drum/toner is bad, or the transfer belt is bad or worn and there could always be a roller causing the marks, or the fuser itself ...
898 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions
