HP OfficeJet 7410 All-In-One InkJet Printer "scanner bulb warming" Questions

scanner bulb warming because the scanner cannot find home. do you hear a noise like the carriage motor contnues to just move a little bit? what happens is this the ccd knows its home by the brightness

...scanner bulb under the glass before the following steps can be taken. There should be a very reflective mirror like strip underneath the bulb. This mirror like strip fogs up and gets dirty use after ...

Scanner error - I've plugged in, reset partial, reset semi, disassembled and cleaned bulbs (both working) and optics, moved to different outlet, checked power supply, put unit in warm room, but still ...

...scanner bulb. May not be moving across or warming up to full capacity. Make sure the scanner is plugged in directly to the wall and not into a surge protector or a power strip. If problem is still ...

...Scanner Bulb with a DRY Q-Tip too. Put scanner unit back into the unit (carefully making sure that the toothed belt was on properly. I then put the scanner unit back to its' "Starting Position" under ...

...glass, giving particular attention to the white strip. Then clean the scanner bulb (gently, its thin glass) and the mirror(s) with a cotton swab sparingly moistened with Windex or a similar

...scanner bulb (gently, its thin glass) and the mirror(s) with a cotton swab sparingly moistened with Windex or a similar cleaner. Hi lore, From HP's support site: Issue One of the following messages ...

scanner bulb warming up message!! hi thr, iam facing a problem in my hp laserjet3380, about the scanner bulb warming up!! when i turn on the printer it initialize and scanner assembly moves shortly ...

bulb. but still the problem persists. Scanner errors are as follows for that model: Scanner error # 1 = dark find 2 = LMW temp find 3 = bulb warm up from off 4 = bulb warm up from coarse 5 = cal label

...scanner bulb but it doesn't finish it keeps on doinh that without finishing how Can I solve this problem Hp printer laser jet 3050 showing warming up scanner bulb please wait But it doesn't finish it ...