HP LaserJet 4250n Printer "not paper" Questions

...not mix the paper you're feeding into the printer at one time. If you need to change the paper or size of paper being used removed any other paper currently in the printer before inserting the new ...

...paper is not loaded in the input tray face down.The paper might not be engaged with the feed rollers.The paper-width guide is pressed against the paper stack too tightly.The paper tray is not ...

...not pull the paper straight up when removing it. (The toner on the page can stain the printer and affect the print quality. If this happens, take the printer to an authorized service center.) If the ...

paper not feeding in order to print The paper will not feed in order to print. There is no paper jam and still is not feeding properly. I get a message saying out of paper or paper not feeding ...

...not contacting the paper in the default paper tray or Pickup roller is worn smooth and not picking up the paper. Turn the printer around and lift the flap behind the paper tray. If you have a ...

...paper and not cardstock or special paper or anything else If it jams in the back it could be your fusser unit or your feed assembly or feed rollers. The least expensive is cleaning your feed rollers. ...

...of the paper. Figure 4: Adjust the paper guides NOTE: Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width

...paper is not damaged, the cause is usually in the paper pickup slipping and causing the printer to think that the paper is either too long or too short. Clean all the rollers in the paper tray cavity ...

...paper not sensing properly while paper travels, result paper mismatch.Do this exercise If you are not tech guy: Remove cartridge, lift registration assm plate blow air ...

...paper size, but do not place them too tight around the paper, since this will result in paper mispicks or jams. if re-positioning these guides doesn't solve your problem, it's probably the paper ...