Question about HP LaserJet Office Equipment & Supplies
...replacing the thermistor, your best bet is to just replace the fuser assembly and this should resolve your issue, so replace the fuser or call someone to do it for you. This should resolve your
...replace the fuser. 3. Faulty DC controller PCB, replace the DC controller PCB. I think you've some problems on the connectors, check the connections. If you are able, replace the broken fuser ...
...replace the fuser. 3. Faulty DC controller PCB. Replace the DC controller PCB. 50.2 error - Fuser Failure (Abnormal Warmup). Perform the following steps: 1. The connector between the fuser and the ...
Question about HP LaserJet Office Equipment & Supplies
fuser is bad. About all you can do is replace the fuser. www.precisionroller.com will have a new fuser for you. This can be faulty thermal element , thermistor ,thermoswitch or fuse of the fuser-unit
...off printer, check and reseat fuser. no luck. any suggestions? fuser was not hot... Replace fuser assembly is the fix Normal consumable, the lamp electrics (lamp, thermistor) will have blown. Part ...
...Fuser Error do we need to replace? Your problem is in the fuser. 50.2 means the fuser is not reaching temerature properly in the allotted time. It either has a burned out ceramic heating element or ...
Question about HP LaserJet Office Equipment & Supplies
replace the fuser. Based on the manual : 50.9 High fuser temperature (sub-thermistor), or pressure release mechanism problem I found this link on-line that will show you how to replace the fuser or re
hp 2420dn printer problem hp 2420dn printer showed 50.6 error how to solve this problem "Low subthermistor fuser error" replace fuser unit or replace thermistor first.
...Assembly. 3. Thermal Fuse. Measure the continuity between connectors JI 03-1 and J1 03-2 on the Fuser. It should be approximately 29 Ohms. If the thermal fuse is open, replace the Fusing ...
Question about HP LaserJet Office Equipment & Supplies
...are usually cause by a fuser that is operating below normal temperature. the temperature is regulated by the thermistor replace it or replace the fuser Check manual on how to realign and clean ...
362 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions