Question about HP LaserJet Office Equipment & Supplies
...50.1 Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully ...
Question about HP LaserJet Office Equipment & Supplies
...50.1 Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully ...
Question about HP LaserJet Office Equipment & Supplies
...is bad line voltage. Don't plug it in a surge protector. Any other 50 error is a fuser problem. Turn the printer off for at least 10 minutes. Power it back on. If the error returns, replace the
...50 fuser error You can reseat the fuser or you will have to replace the fuser. Please note the these machines the fuser is located in the middle of the machine. Most likley it's a bad fuser. what is ...
Question about HP LaserJet Office Equipment & Supplies
...50.2 fuser error before and after I change the cartridge When a 50.x fuser appear its because the fuser its worn, its probably overheating. I can suggest to take it out (in the back you will see 2 ...
50.2 fuser error that i can neither print, nor xerox & nor scan also. what can i do now? When a 50.x fuser appear its because the fuser its worn, its probably overheating. I can suggest to take it
...Fuser error 50.7 I have a hp 2605n here and it's showing all the time an error: 50.7. I have already turned off and on again after 30 minutes and the error is still there. Took off the fuser, and ...
50 Service Errors are symptoms of a fuser malfunction. They may indicate either an improperly seated fuser or a defective fuser. Turn your printer off for 20 minutes and then turn it back on. This may
...50.X FUSER ERROR alternates with For help press A fuser error has occurred. X Description 1 - low fuser temperature 2 - fuser warmup service 3 - high fuser temperature 4 - faulty fuser 8 - low fuser ...
...replacing it? and if so what is a reliable yet inexpesive printer that could replace it. Thank you, Heather Error 50 is a fuser error, you have to replace it. I thonk it's not convenient for
1,644 questions posted
Usually answered in minutes!
1,001 Questions
724 Questions
663 Questions
593 Questions
492 Questions
