Question about Dell Office Equipment & Supplies
...feed the paper properly! working great and then bam, the paper wont feed through and it crimps up at the point of the feeder... Some of your rollers might not be working. we cant get the printer to ...
...Paper feed issues Epson 1520 printer - works fine - ie prints, OK, etc - but paper feed has been playing up. It feeds at least one or more pieces of paper through without printing on them then stops ...
Question about Xerox Office Equipment & Supplies
paper feed partially out? If it does not, are there paper black scuff marks where the rollers were trying to feed the paper. Can you hear the solenoids feed the paper? If the paper does feed and seems
Question about HP Office Equipment & Supplies
3) the paper surface bright and the roller worn could be cause paper feed fail, you need clean the roller anyway. still not fixed, you need to adjust the roller pressure by increase the spring force.
Question about Canon Office Equipment & Supplies
paper feed on my canon fc-224s doesn't feed! paper feed is not working properly - doesn't grip paper so only feeds if paper is gently hand pushed Hello. clean the roller "which take the paper" by any ...
paper feed problem It will not feed the paper into the machine, it reads out of paper, load paper tray. If you feed the paper into it, the machine will eventually take it and print. Check all this----
Question about HP Office Equipment & Supplies
...paper feed at back of unit (normal paper feed direction) on the side that's obstructed and look in the unit to see where the paper enters. Then use card stock or thicker paper in reverse ...
Question about Canon Office Equipment & Supplies
...paper feed problem with a Canon MP 250 and solved it this way. (not my own) After many attempts t clean the feed rollers etc. I tried the following. I cut a piece of card stock about two inches wide. ...
Question about Office Equipment & Supplies
paper feed & paper sep. rollers? Also, have you cleaned the paper pick up clutch? The reason it works with the manual feed is that it is not used as much. Also, have you cleaned the rollers with wd-40
...feed the paper? Does it try to feed the paper? Does it pull the paper is a little and jam? If the machine sees the ADF and it starts to feed the paper but jams --- clean the feed rollers/ tires with ...
958 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions