Samsung RS261MDBP Side by Side Refrigerator Ice and Water Dispenser - "maker push" Questions

The ice maker makes a loud racket unless the freezer door is open. You have an object jammed in ice makers path. The freezer door has something on it that is pushing into the ice maker perhaps.

...push it closed with your hand then it works. Another problem I have is the ice maker sometimes lets ice fall down inside of the freezer what could that be. Thanks Terry L. The flap may be getting ...

...my ice maker door will not open fully On the left side there is a small hinged cover used by the IR ice level sensor you need to push in on that door and then you can open the ice maker cover ...

...push out little bits of ice or none at all. I have been checking to see if water is filling into the ice slots, and there does not appear to be water flowing in. Can you drop some knowledge on me how ...

maker will make ice but I have to push the cut off handle on the ice maker down after everytime it makes ice if not it will not dump the next load of ice. Hello. You will need to replace the icemaker.

ice full when no ice portable ice maker There is no ice in the ice bin but ice full light is on so it won't make ice. One of the sensor lights seems to be out. There is some sort of arm that fits into

push buton WATER/ICE nothing hapend. Ice maker work fine making Ice but i cann not activate ice cube or crushed ice its only stay on water. Did any of you have the same problem I wouldn't buy a Daewoo

...maker will only make crushed ice and no cubes, what could be the problem Open the freezer door. Pull the ice bin forward about 3 inches. Push the ice bin to the rear of the freezer until it seats and ...

maker works fine but the ice dispenser doesn't. I can hear a sound and a click when I push it and the dispenser flap works but no ice will come out. Water works fine. The four prong (flat) plug to the

my ice maker cycles and stops with ice full light on with no ice made ice maker is a igloo 102C portable model If ice is in the tray it could be that the heating element designed to slightly melt the ...