...The mirrors in the optical system under the glass may be dirty or the lens near the CCD (charge coupled device) may also be dirty. This can happen over time. Dust gets in there and can cause
...glass and get the same results. Using a parallel cable and have Windows XP (same as when we used this last) and software is Precision Pro. Thanks. Try carefully taking the scanner apart and cleaning ...
glass portion, reattach the power plug and click on the hp director icon and let the scanner scan without any document. now keep an eye on the belt of the scanner (that moves the lens up and down), if
Question about HP ScanJet Office Equipment & Supplies
...glass and mine has a tiny scratch in the lens that is causing the line. This could be your problem. find the lens and use a LED flashlight to inspect your lens for scratches. If its scratched like ...
...glass. Ensure that the electronics, the Lens module and the LED are carefully placed back and cable connected properly. There is a small spring plate screwed along with the LED module, which needs to ...
...Lens. i highly recommend not to mess up with your scanner if you are not aware of those all parts and if you are just open up scanner glass cover and clean those all ADF kits otherwise better getting ...
...lens so if you are handy on it then take off fron scanning glass and take out glasses and clean the out with clean cloths. and put them back. note: if you are not aware of it please do not mess up ...
glass assembly so you can gain access to the scanner lens. They sometimes jump off their track in shipping. If you can move your scanner lens freely by hand then I am sure you have a bad motor. Before
Question about HP ScanJet Office Equipment & Supplies
...glass thoroughly. It must be dust particle sitting on the glass. S. Mohan. Chennao, India hello I have the same problem, I cleaned everything into de lens and it didn't make any change. What could
...glass from diffrent positions to make certain it is clean. I have seen lines caused by dirt, faulty scanner lens, wrong driver, and a faulty interface(USB) cables. If you have access to another ...
293 questions posted
Usually answered in minutes!
109 Questions
80 Questions
73 Questions
80 Questions
68 Questions