Arris SB5100 SURFboard DOCSIS 2.0 Cable Modem (50120900100) "motorola ethernet ports working" Questions

...Motorola cable modem has an Ethernet port and a USB port. That's all, except for the cable coax and the power supply, of course. Between computer, modem, and router, which cables go where? Thanks. ...

ethernet cable to port in the back of motorola 5101 it does not work. when i plug the usb cable the internet is active. Have you tried changing the lan settings, or better still use the disc that came

...Motorola today and explained my problem and told him everything I had checked through troubleshooting. The fact that I could get reception through the USB cable port but not the Ethernet port, told ...

...Motorola SURFboard to recognize it. I had the USB connection installed and the NETGEAR uses ethernet, so I tried to install the ethernet but my computer doesn't recognize it. The Cable modem must be ...

...working. I can't figure out why the hard wired ethernet cable from the router to the desktop isn't working. Any ideas? Check the socket in either the router or the PC. I had the same problem, only ...

...to authorise the router for access. After that is done you will plug you XBOX into 1 of the 4 numbered ports on the router. Then you will need an additional ethernet cord for your PC. Hope this ...

Motorola SB5120 Problem with ethernet cable For some reason when the modem was installed the guy connected it to the CPU with a USB cord. Now we are trying to set up a wireless router so we need to ...

working the ethenet port on my mordem not showing lights if there is no light on ethernet it might be that the cable is deffective or its not properly plugged in.. and make sure that you're Local Area

Motorola Surfboard 4220 not working with my Netgear WGT624 router Hi I have recently been set up with the Surfboard modem which works fine when I ethernet it to my macbook. However I have just ...

...Motorola sb5100 to a Linksys wrt54g Make sure that you have the ethernet cord from your modem plugged into the WAN/Internet port on your router. Then unplug the power cord from your cable modem and ...