Neff 24 in. S5543X2 Built-in Dishwasher "programme stuck" Questions

...programme seems stuck on end cycle? cant reset programme Unplug it, move timer to start and plug back in. If it still seems stuck at the end it is almost certainly the timer. If it starts as normal, ...

...stuck in test mode. This is entered by holding all 3 programme buttons and powering on. Certain combinations then cause the pump to run even with door open. All lamps lit. How do I exit this and get ...

...STUCK AT THE SAME TIME IN THE PROGRAMME, i TURNED IT OFF AND CHANGED PROGRAMMES WHERE IT EVENTUALLY MADE IT THROUGH A 30MIN WASH PROGRAMME, WITH THE BUZZING PROGRAMME SELECTOR SWITCH, ANY IDEAS????? ...

...stuck mid programme. It was part way through a programme when we had a pipe burst. Pipe all sorted now but the dishwasher just makes a noise like it is asking for water but nothing happens. When you ...

...programme to change. It seems to be stuck on the delicate cycle. I have an integrated drawer system. http://www.scribd.com/doc/6462163/DD601V2-Manual Could need resetting , try turning it on and off ...

programme stuck I can't change the programme for the top drawer of my DD603 - its on the rinse cycle and won't move to anything else. Can anyone help? Try swapping the motor controllers (computers) ...

...programme starts and during first phase just continues - water does not heat up Hi, This could be a problem with the controller as it is not waiting for water to warm before continuing. Water element ...

...stuck in mid final rinse cycle. When I move the dial on the programme continues to the end. Do i need a replacement dial selector / timer switch Hi I have a similar problem, did you find the cause of ...

programme is lit up, but it is stuck on this until you turn off the power and switch on again. Lets try the following hope this works 1.- unplug the appliance, isolate it from the electric supply. 2.-

...stuck on 1 minute. Now I acnt get it to start on any programme. It starts up ok nut the timer doesn't advance at all! I checked the pump, that's ok and cleaned out the food filters, reloaded salt and ...