...paper and quits, error message after. replace cutter assy. Part # Acc-230kit or send in for service. Agson - 856-751-9048 Ideally blow out with compressed air to clear paper dust. Then spray with ...
Question about Sony UP Office Equipment & Supplies
paper is caught in the cutter and you cannot open the printer cover, open the cutter cover as shown in illustration J. 4. Turn the knob until you see a triangle in the opening. This returns the cutter
Question about Kodak Office Equipment & Supplies
...cutter area. When I turned on the printer I got a Paper Jam with Mechanical Error 11/12. I know enough about the printer if I can get into the diagnostic mode to clear the error code by resetting the ...
paper and pull it out. You have to be careful about putting the entire thing together. If the cutter comes apart, remember that the long spring goes into the black 'cartridge' looking doohinky and the
...cutter blade. Slide the carriage to the left and look for any paper that also may be restricting the carriage from moving freely. 00010004CR Motor encoder check error 00010005CR Motor out of step ...
...cutter blade. Slide the carriage to the left and look for any paper that also may be restricting the carriage from moving freely. 00010004 CR Motor encoder check error Hopethis helps. If it does, ...
paper obstructing the path of the carriage that houses the cutter blade or more than likely impact on the lower left side of the printer causing a bend in the metal that holds the Reverse switch. This
paper obstructing the path of the carriage that houses the cutter blade or there has been an impact on the lower side of the printer causing a bend in the metal that holds the home switch. This switch
Cutter blade may have some receipt paper jamming its movement. It is not a very powerful motor and easily jammed. Open the top and look closely for little cut pieces of paper. Clear out all the pieces
36 questions posted
Usually answered in minutes!
34 Questions
13 Questions
6 Questions
5 Questions
4 Questions