not work. Took light out, unpluged dryer and cleaned out light area to remove lint and again replaced light, still does not work Check power with a voltmeter to the light socket. If there is no power,
...light 1. heater relay f09 lights 1&4 eprom/setup error f10 lights 1&3, pressure switch not sensing f11 lights 1&3&4, pump/draining error f12 lights 1&2, communication error f13 ...
...light will not go off and the dryer will not work at all, I tried holding the end of cycle button for three seconds, but the light remains on. i have tried unplugging the dryer, but when I plug it ...
Question about Whirlpool Dryers
...even though there is power and lights light up Dryer will not start when I press the srat button even though there is power and lights light up. Any help/recommendations? only 120 not 220 ...
...light up, flash and it beeps 3 times. The dryer will not start. We cleaned out the lint but it still will not work. HELP The door is not compltely closing. Make sure to push it in hard around the ...
...not dim the light! I can push the light button quickly to turn the light on or off. If light is off, I can hold the light button for minutes and nothing happens. If the light is on and I hold the ...
pilot is not lit how to light the pilot light There is no pilot light to light up for it ignites automaticly. If it is not working you will need a new replacement spark ignitor
Question about Kenmore Dryers
light in dryer does not go on and cycle status light will not light will go on either power does go on and start button too Did you try to change the light bulb?
217 questions posted
Usually answered in minutes!
606 Questions
210 Questions
148 Questions
27 Questions
11 Questions