JETSYSTEM 1200 Hope you can help me, cant find the manual (surprise surprise!) mid wash an error came up and the machine started beeping - it was E40, any ideas? thanks! Niamh hi there e40 fault could
...Jetsystem Turbodry 1200. Hello, Have you fixed the problem yet? And if yes, how?? I have the same washing machine with the same problem. So I hope you can help me! Best regards, Nourah van ...
I have a Zanussi 1200 jetsystem XC6 washing machibne which is showing error 40 can you tell me what this means please? Door interlock problems
Question about Washing Machines
...JETSYSTEM 1200 and it does not heat the water. Any suggestions as to what to do? Thanks I select the 90 degrees cycle, but the water in the drum keeps coming cold need to check the wash ...
zanussi jetsystem turbodry 1200 door wont open its the doorcatch,turn power off, remove lid and put hand in machine where doorlock is situated feel about and try open catch, repair or replace?
jetsystem 1200 wahser dryer problem Keeps filling up and flodding even when turned off You usually turn off your inlet valve after your washing is done. Well, if it keeps filling after u hv turned off
...jetsystem 1200 XC leaking from underneath I have a zanussi jet system which has started leaking from underneath seems to be at the front. any help appreciated Check the door below, it's pretty ...
...jetsystem turbodry 1200 when my washer enters the dry cycle it goes into alarm mode and shows fault E20. How can I fix this? Thanks Andy clean out filter, door bottom right, unscrew filter and clean ...
jetsystem 1200 fjs1225w it currently only has a cold hose can a hot hose be fitted aswell if so were can i purchase the part? yes but NO .you only have one inlet valve on this model and if you connect
73 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions