Zanussi FLA1201W Front Load Washer "programme dial spins" Questions

...fills with water and then the programme dial just spins to number 9 and nothing seems to happen. Prior to this fault the machine used to take a very long time to complete a wash cycle. test the ...

...just spins around without clicking and the machine is stuck on pump cycle. Can anybody help? YOUR PROGRAMME DIAL HAS THREADED SO YOU WILL NEED A NEW ONE, YOU CAN GOOGLE THE PART FOR AN EXACT ...

...corrected now and although it has finished washing, the dial has stopped in the middle of a cycle. Does anybody know how to reset the programme dial? my beko wma 1510s will not spin and is heating ...

dial to OFF and then onto a spin programme. This sometimes works but often looks like it is going to work and then 'gets stuck' rotating with 1min remaining on the cycle and has failed to spin. I have

...dial for programme and temperature selection, 3D AquaSpa wash system with cascade for faster water penetration, Rinse plus system, Freshen up programme, Safeguard monitoring system adjusts load ...

...programme selector dial. I hope I'm not stating the obvious, but appliance "faults" are often simple and don't require taking the machine apart or calling a service engineer. If you've already tried ...

...to any other cycle programme. I've switched it off several times, but no matter which programme you turn the dial to it starts it's small wash again. Help! replace main circuit board. likely

...dial appears to "stick" and the programme does not procede. I have tried to move the dial "gently" to the next position but it does the same and won't move any further. Then it wouldn't spin when I ...

...programme dial to rinse and spin then works fine. Do we need a new timer? Macine fills and washes continually. I can pause/cancel the cycle and move dial to rinse/spin manually to complete the cycle. ...

...dial is not a timer that moves through the prog, it is a selector switch, which selects the programme you require, and therefore does not move round You need to check the filter re the spin prob. ...