Question about Whirlpool Washing Machines
...sensing light and lid lock lights turn on. Then after a few seconds the lid lock light goes off and the sensing light stays flashing. I can't get the washer to start because the sensing light ...
Question about Washing Machines
...light flashing intermittently when you try to start a cycle. ... I'm going to post what SENSING does first, then you will need to locate your tech. ... start with thelid lock on and blinking, or the ...
...Sensing light goes on, lid locks, makes some of the normal sensing noises, but then stops and lid lock light flashes. Last cycle didn't finish draining and spinning. When lid lock flashes, that is an ...
Question about Whirlpool Washing Machines
...sensing cycle. It starts to spin to sense the load, then the lock flashes and unlocks. Starts to spin again to sense but stops and the lock light starts flashing. It may be as simple as a defective ...
Question about Maytag Washing Machines
...sensing light flashes as well. It will continue to click until I hold start to reset then the sensing light stays on. I have unplugged it and left it for up to 3 hours. When it is plugged back in, it ...
Question about Whirlpool Washing Machines
...open, it wont let you start it. Seems like itias your start stop sensor. Lid light flashing means its paused. Check your owners manual. May be something as simple as your washer needs to be ...
WTW4850XQ spins for a few seconds, then quits Place the unit in diagnostic to do this make sure machine is off turn control knob to the left at least 3 times to clear now turn knob 3 clicks to the ...
Question about Washing Machines
...I turn the switch on the sensing light comes on it hums the lid unlocks and both lights start flashing and won't do anything else. The flashing is a trouble code. Your machine needs to be
Question about Kenmore Washing Machines
...the washer cycle stops, constant flashing of the sensing light. Lid ock will sometimes flash and lock and unlock a couple of times. No water will fill. No agitation or spin. Drain pump will
Question about Kenmore Washing Machines
sensing light stays on on Kenmore HE topload washer. when you push the start button, the lid locks but then unlocks and wont start. It just started filling. what should I do? water sensor Does the lid
79 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions
