...button keeps flashing. checked door and closed properly but still flashes and wash cycle not starting?? if I turn it off I can open the door nothing seems in the way. close door and try again button ...
Question about Maytag Washing Machines
button pressed for about 6 seconds.
Or
https://readytodiy.com/maytag-washer-sensing-light-blinking-0051/#:~:text=Maytag%20Washer%20Sensing%20Light%20Flashing%3A%20Causes%2FHow%20to%20Fix
Question about Whirlpool Washing Machines
...button the sensing light and lid lock lights turn on. Then after a few seconds the lid lock light goes off and the sensing light stays flashing. I can't get the washer to start because the ...
Question about Maytag Washing Machines
...button it begins its sensing mode locks lids and doesn't go pass this mode. Lid locked lit keeps flashing and sensing lite stays on Most likely actuator is bad or drain Pump is defective or ...
...flashing as if paused ,no error code is displayed and i have cleaned the filter ,If I press and hold the start button for a few seconds machine tries to empty and door locks then once done light ...
Question about Maytag Washing Machines
...i pushed the start button all i hear is a clicking sound sensing light is flashing then the lid lock flashes probably lid lock not mounted the right way redo instalation or you bought a broken ...
Question about Kenmore Washing Machines
...sensing. When I push the start button it locks the lid and starts sensing but it clicks and the lid lock button starts flashing. What do I need to do? Obtain the Kenmore owner's manual and follow the ...
...button the start light comes on as normal but nothing happens. If the door does not lock at this point it probably needs door lock replacing Even if the door does lock it may not be sensing it, hense ...
Question about GE Washing Machines
...button would flash and I wouldn't be able to start another wash load. After learning that I have to unplug, then replug, the plug, I was happy....until I had to wash another load. Is there a way to ...
Question about AEG Washing Machines
...flashing sequence corresponding to the alarm. The alarm sequence continues as long as the two buttons are held down. E41 - Door open E42 - Problems of door closure E43 - Interlock power supply triac ...
79 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions