Question about Maytag Washing Machines
...drum is rubbing due to POOR ALIGNMENT or poor BEARING settings. You need to check the PLAY on the drum and if this shakes a bit then the assembly must be reset with correct aligment and the drum must ...
Question about Whirlpool Washing Machines
Whirlpool aa1200 drum is rubbing off door gasket can the gasket be replaced Yes, can be replaced.
...drum is tilted up. Rubs gasket. Took gasket off, still tilted up. Remove the case and check springs and suspension. Something has come adrift. ...
gasket. The dryer has felt strips on the front that the drum rubs on. When the felt wears out there is room for clothes to get between the drum and the felt which puts the burnt looking streak on them
Question about Hoover Washing Machines
drum. You may need a torch now. Pushing the gasket back look into the left, front of the machine and on the front of the tub you'll see the fill hose that comes from the soap dispenser. Check that the
...drum turns slow there is a sound of rubber rubbing against smooth steel surface.The outer door boot looks fine. Is there another gasket that could cause this? It does not leak anywhere at thie time ...
drum and you should check the perimeter rubber gasket to verify if there is some rubbing on it. I can't say for sure what the odd noise is except for a rubbing situation. If you ar able to replace the
...rubbing now noticed that there is a gap in lower front tub gasket. the upper front gasket is over lapping. it would appear as the drum bearing has collapsed,the rear panel will need to be removed to ...
64 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions