Canon BJC 240 InkJet Printer "print light" Questions

...light flashes and beeps 8 times; won't print From Canon sounds like print head problem BC10e for Black only or BC11e for combo. 1.Replace or reinstall the BJ Cartridge ( Print Head ) - BJC-85 2.The ...

...print job not done, this POWER light flashing green. 2) If the CHARGE/ERROR light is flashing orange with beep 3 times, it mean your cartridge need to be install (especially the 1st time turn on ...

...print is so light that it is barely visible when printer is finished. Does this with a brand new cartridge. Any ideas. Printer attempts to print but no ink is on the paper Printer attempts to print ...

... The print head is getting to hot. The solution is to replace the print head. The printer is fine, but you need to replace the print head. when I try to print i get 3 beeps and the error light comes ...

1 times, it mean the paper is not properly set in the feed slot, just remove the paper and reload it properly. If the POWER light is flashing green, that mean your print job is not finish yet. YBC (/\

...print heads are clean, the POWER light will stay on, indicating that the printer is ready for operation. Perform another test print to make sure the new ink tanks are performing correctly. To remove ...

Won't Print The power and error lights both blink and it beeps 8 times This is a temperature error, and may be caused by a defective print head. If replacing the print head does not fix it, the main ...

...print? i have a canon bjc-250 printer, i installed a new ink cartridge, howevere, a green light keeps blinking. i removed the cartridge several times, turned off the power and re-connect my printer ...

...light once. I can't get anything to print. i have changed all the ink cartridges and have re started my computer several times. Any ideas what might be wrong? I would recommend you to uninstall the ...

...light comes on and then this repeats itself. I cannot locate a printer manual on line and did not receive one with the printer as it was given to me used. Another problem, I installed new color ...