Question about Canon LBP Office Equipment & Supplies
access to the feed rollers. I used isopropol alcohol and Q-tips to clean the rollers and the pads under the rollers. This fixed my problem. clean the separator pad, just under the paper pickup rollers
Question about Canon Office Equipment & Supplies
...access the paper ASF paper feed roller cleaning - When paper does not feed properly. - When the front side of the paper is smeared. To clean the paper feed rollers. - Machine buttons - Computer (MP ...
...surface. Verify that the three paper feed rollers on the rear access door are clean and rotate freely. Reinstall the rear access door and then plug the power cord back in.Turn the all-in-one back
...access to paper roller assembly, usually in rear 4. using lint free cloth, dampened with distilled water clean rollers -- read manual to determine direction of rotation (usually clockwise) 5. keep ...
Question about Canon LBP Office Equipment & Supplies
...access door and paper rollers" title="Graphic of the rear access door and paper rollers"> Allow the rollers to dry completely, and then replace the rear access door or duplexer. Slide the rear ...
...access door. The paper width guide is not positioned against the paper. Adjust the paper width guide against the edge of the paper. The paper is not supported. Paper should be flat and smooth with no ...
...access door. See the picture above. Wipe the paper rollers with a lint-free cloth lightly moistened with distilled or bottled water. Rotate the rollers with your fingers to clean all the way around. ...
...paper can skew if the rear access door isn't locked. Every six months to one year, clean the paper feed rollers with a rag lightly moistened with clean water. Over time the paper feed rollers ...
...access point, where the paper comes out, inspect that area as well looking for paper or fragments. Sometimes if you can turn the print rollers by hand a paper jam will reveal itself Try cleaning the ...
Question about Canon Office Equipment & Supplies
paper could still be wedged somewhere in the roller area. Question: How can I access that area for inspection and possible repair/adjustment? Please see this solution from Canon. It is recommended you
181 questions posted
Usually answered in minutes!
157 Questions
56 Questions
30 Questions
35 Questions
37 Questions
