Question about Canon Office Equipment & Supplies
...loose from inside the printer and I don't know how to reattach it. The ribbon has a letter "L" on the left side. The ribbon connects to a spring on the left, goes thru a slot in the back of the ...
Question about Canon Office Equipment & Supplies
...loose), maybe the spring or a clips that attach at the right and the left of the door loose,, so that the sensor cant detect the toner,,, please give me a advise or a tips to fix the problem, maybe a ...
Question about Canon Office Equipment & Supplies
loose black spring on the right hand side of the chamber. I have removed the retaining screws & propped open the top of the cartridge area to give better access, but cannot see how or where the spring
Question about Canon Office Equipment & Supplies
...loose spring on the left side of the printer? Please follow the link: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00577763 this includes a detail ...
Question about Canon Office Equipment & Supplies
...loose ribbed black/brown thin band inside the printer where the cartridges are changed-where does it belong please Sounds like the carriage belt, it goes around a motor pulley on the far right side, ...
...spring loose on the right side where that cartridge goes, it may have poked a hole in the ribbon cable when that happens you have to replace the carriage assembly. Sometimes this machine lies and you ...
Question about Canon Office Equipment & Supplies
loose and not able to drive the carriage. There is a gear on the right side of the carriage and a pulley on the left side of the carriage. The spring which holds the pulley tight is missing or broken.
Spring came loose under the roller On the HP LaserJet 8150 printer I was cleaning the roller under the Toner Cartridge and one of the three springs came loose as I was putting the roller back in. I ...
Question about Canon Office Equipment & Supplies
...spring to a metal tab on the left side of the printer. The right side of the encoder has a hole in it, so I hooked that onto a metal tab on the right side of the printer. I threaded the encoder ...
...spring guide on the loose paper guide, then maneuver the lower end of each spring into the hole on the lower side, so the springs are in place again. Push on the loose paper guide from above to check ...
6 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions