Canon i850 InkJet Photo Printer "ink tanks lamps light" Questions

...ink tanks into the appropriate slots, and instructions say the 'ink lamp lights red", but there is no light. Installed ink tanks into the appropriate slots, and instructions say the 'ink lamp lights ...

...ink tanks on which ink lamps are off." The blue ink tanks is always secure in it's place but the light is always off. As soon as I take the ink tank out and reinstall it the error light flashes ...

...ink tanks are installed properly and the ink tank lamps light red Note: Ink Tank Lamp You can check the status of each ink tank according to the way its lamp flashes. - On: The printer is ready to ...

...ink tanks need replacing, remove and replace each one individually. Check the ink tank. If the orange tape is as shown in Figure (1), it is properly removed. If the orange tape is as shown in Figure ...

...ink tanks in the proper order. The proper arrangement from the left to right is Black - (CLI-8BK), Black -(PGI-5BK), Yellow - (CLI-8Y), Magenta (CLI-8M), Cyan (CLI-8C). Replacing Tanks 1) Ensure that ...

ink tanks. When ink runs out or other errors occur, an error message is displayed on the LCD to inform you of the error. See "An Error Message Is Displayed on the LCD".When printing from your computer

...ink tanks as this may cause the ink to leak out. Do not reattach the protective cap once you have removed it. Insert ink tanks into the print head. NOTE: Press the mark on the ink tank firmly until ...

...ink tanks properly MP500 Ink Tank Seated Properly Refer to the following steps to verify the ink tanks are seated correctly: Confirm that the printer is powered on and press the Open button. (The ...

ink tanks in place properly? Have you tried this method to ensure they're properly seated? Is the printer on or off when you try to seat the tanks? Refer to the following steps to verify the ink tanks

...ink tanks on which ink lamps are off' this keeps happening and it?s because of the Magenta, the ink tank isn't even empty maybe quarter of the ink has been used. So I unclick it and push it back in ...