...not turn on, there are lights on but nothing happening. I have had turning off and unplug overnight - still cannot get it to turn on! This ones easy - Just unplug your printer for 1 or 2 minutes then ...
...turn on Hi I got a print head error message telling me that no prnt head was installed. It then printed the page but would not cut the finished page. I turned the machine off , it them displayed the ...
...e161-403 error code Over heat of the print head. Turn off - Turn on the machine, if this will not work try to access the service mode update to the latest firmware version and replace the print ...
Question about Canon imagePROGRAF Office Equipment & Supplies
...turn off the printer. c) Buttons used in Service mode ? Selecting menus and parameters: [Left arrow] button or [right arrow] button ? Entering a lower-level menu: [Lower arrow] button ? Entering a ...
...not respond so i pressed the power botton to turn off now it wont turn back on i changed fuse in plug also ?? hi this is kamal pls call to any printer vendor or yourself clean the dust and install ...
...with Ink Cartridge door. you must unplug the printer. Turning on the on/off button is not enough. Then the printer ask you to remove the empty cartridge and open the door, canceling the E02E05
...Turn the printer on. Restart your computer. Try to print -- has the message vanished? Before you spend $5-600 on a new printhead that could also dry out or clog .... replace the last new ink tank you ...
...off does not fix the issue, the unit is running version 1.34 firmware. check if a foreign material (like paper) is stracked inside the machine. Usually we find paper on the right side of the machine ...
Question about Canon imagePROGRAF Office Equipment & Supplies
...turn on again. 03130031-2618 VH voltage error Check the power supply unit. Dear fix ya member, The problem is in the mainboard, you must check the printhead first, before change the mainboard. Why it ...
Question about Canon imagePROGRAF Office Equipment & Supplies
turn off power . i have added new head with no result also booted up with no head in and still no change . i have noticed when it starts up the ink in the pipes do are not full and look as if they are
30 questions posted
Usually answered in minutes!
203 Questions
142 Questions
118 Questions
113 Questions
50 Questions