Question about Canon PIXMA Office Equipment & Supplies
...day, that strip is a timing strip. if it broke on both sides then the best is to replace the strip with new or second hand one. there is no way fix the strip itself. believe me, I have tried. ...
...i series and above) may cause the same symptom. Try to clean film encoder by wiping it with moistened clothe first. Remedial action: Replace carriage part Clean/replace film timing **** strip ...
Question about Canon PIXMA Office Equipment & Supplies
timing strip. Solution 2: The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough . Lubricate the sliders with some white grease
...Blinking 2 time [5100] CARRAIAGE ERROR An error occured in the carriage encoder signal. May need to replace the following parts : - CARRIAGE UNIT - TIMING **** STRIP FILM - LOGIC BOARD - CARRIAGE ...
...with no luck. I have run the printer alignment check numerous times with no success. I have removed/replaced the printer cartridges. I have reinstalled the software and drivers. Can anyone help me? I ...
...timing slit strip.. this strip is located at the back of carriage..it is place horizontally at the back of carriage, piece like a plastic.check it out men!!..or wait for a few days until the dirt or ...
strip (or timing strip) is the 1/4 inch plastic strip that runs across the printer and through the head carriage. It's got supports on both sides. If becomes dislodged it will generate this error. (it
foutmelding 5100 canon ip4200 error [5100] = CARRIAGE ERROR you may need to replace - CARRIAGE UNIT - TIMING **** STRIP FILM - LOGIC BOARD ASSY - CARRIAGE MOTOR
Question about Canon PIXMA Office Equipment & Supplies
replaced cartidge-printer prints like it still needs cartridge I have replaces the Black cartridge 2 times on my Pixma printer and it stll prints like it needs a new cartrige. I went to the store and ...
Question about Canon PIXMA Office Equipment & Supplies
replace the guide on the wheel - motor If the timing strip (a little strip with a lot of little vertical lines on it is dirty, clean it with water. DO NOT USE Alcohol or other solvents, if just one of
127 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions