...remove the print head? If you purchased the printer new, you would have had to install the print head before youput the cartridges in. The print head id he bit the cartridges clip into. So to remove ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the print head or ink tanks. Remove the ink tanks before proceeding to remove the print head. Remove the Ink Tanks Confirm that the printer is powered on. Pull open the paper output tray. Lift ...
...Remove the print head from its package and remove the orange protective cap. <1> Electrical Contacts and Print Head Face's Nozzle Area <2> Ink Supply Filters Note: To avoid any damage, do ...
Question about Canon PIXMA Office Equipment & Supplies
...Remove the print head from its package and remove the orange protective cap. <1> Electrical Contacts and Print Head Face's Nozzle Area <2> Ink Supply Filters Note: To avoid any damage, do ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist you need to replace the print head.It's part ...
Question about Canon PIXMA Office Equipment & Supplies
...remove the print head, wash in warm water carefully, do not use any brush or do hard rubbing, dab dry on paper towel. Replace print head into printer, then cartridges, then switch power on. Do print ...
...holder is in the center and open the inner cover. Remove all the ink tanks. Raise the print head lock lever and remove the print head. Reseat the print head and lock the lever. Replace the ink
Question about Canon PIXMA Office Equipment & Supplies
...print head. 1. Remove and set aside the ink cartidges (don't make a mess) 2. lift the gray print head lock lever that is to the left of where the ink cartridges go. 3. Lift out the print head out ...
...remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all again.If the problem persist the print head is defective and you need to ...
...head. In this case: (1) Remove the print head from the printer (2) Soak it in hot water for an hour or so (3) Remove it, let it dry completely (4) Replace the print head and cartridges and test ...
510 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
