Question about Canon Office Equipment & Supplies
...print head is stuck. Either the print head block has gotten ink in it and will not allow it to tilt, or the print head wiper is tacked, ( stuck) to the print head not allowing it to move properly. ...
Question about Canon Office Equipment & Supplies
...print head cleaning fluid or distilled water NOT TAP WATER. Proceed as follows: Turn the printer on, and as soon as the print head starts to move, pull the power lead out of the printer, or turn it ...
Question about Canon Office Equipment & Supplies
print head moves but no print. will not print . print head moves but does not print. new ink installed. Since this is an inkjet machine, there should be a way to force the printer to go through a self
print head will not move Trying to change print cartridge - following instructions but the print head seems stuck to the right hand side and will not move so that we can take the thing out and replace
Question about Canon Office Equipment & Supplies
...print head out of position, how do I correct this problem There are 2 problems that usually cause that. 1 is if you have had a power failure , or even not, the print head wiper blade tacks to the ...
Question about Canon Office Equipment & Supplies
...Can you hear the print head moving?? If so then ink has run out OR is dry in print head, go into Printer software and locate "printhead clean". If print head is not moving maybe fault
print head carrier will move to an accessible position inside the printer, with the first empty print head stopping under the ink out mark (the ink droplet with the line through it) located just above
...print head not being able to move freely. Most likely some ink has seeped into the staineless steel pivot block that allows the print head to move from home to print posption. 4 most likely problems. ...
Question about Canon Office Equipment & Supplies
...print head Confirm that the printer is powered on. Check that the printer is powered on, and open the front cover. Wait until the print head moves to the center. Hold and slowly move the print head ...
Question about Canon Office Equipment & Supplies
...print head not moving. Sometimes Error code 6A00 print head not moving. Sometimes I can move it and get it to work but not dependable. The 6A00 is a Canon generic code for paper path jam. Solution 1: ...
203 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions