...Image in your scanning software. Good luck! William For future scans, simply feed the other end of the document through the scanner first. Then the scanned image will come out right side up. But the ...
...image is sent to the computer Harddisk and if the disk is full or if it had not been defragged for a long time, the sectors may not be contiguous for speedy writing, This will slow up the scanning. ...
Question about Canon DR Office Equipment & Supplies
...If you dont have Raster Editing software, best way is to stick your image onto a white paper and scan the whole paper. Ensure that the ends are trim. ( I am assuming it is faceup scanning) S. ...
not scanning imags we have scanning but get scan blank & no display any images yes that is the problem
Question about Canon DR Office Equipment & Supplies
...be the problem? Maybe it needs cleaning? Select Auto for page size. The scanning software displays scanned image in many options, including 'fit'. Choose 'fit' so that you see complete image. S. ...
Question about Canon DR Office Equipment & Supplies
...image scanned by Canon DR-2580C Path-Through I had an unfortunate incident where some pages with staples were fed through the scanner. As a result, the sensors must have been scratched/damaged, as ...
Question about Canon DR Office Equipment & Supplies
...image is less than that of the guide-plate, you will get black background. You can clean this through software. If you had select B&W scanning and chosen to save file in JPG format, the scanner ...
Question about Canon DR Office Equipment & Supplies
How to have white background on small documents I have been using CapturePerfect 2.0 with my Canon 2080-C scanner for going on 10 years. I had to reinstall the scanner and software on a new computer ...
...the scanned image while scanning itself. Also select 'Image only" radio button instead of 'Guide Plate'. The software will remove black borders around the image. S. Mohan, Chennai, ...
...Image reader is clean. Can the upper and lower imager be swapped to see if the problem is the upper imager? You cannot swap upper and lower images. You can scan the page twice (in duplex mode) by ...
216 questions posted
Usually answered in minutes!
58 Questions
64 Questions
33 Questions
38 Questions
28 Questions