Question about Canon DR Office Equipment & Supplies
...you need to adjust the sensor just under the Document lifting tray. If it not lifting, then you may have to change the motor. (Just now saw yr note and replying, hope it is not tooooo late!) S. ...
Question about Canon DR Office Equipment & Supplies
Tray lifts to meet the rollers then drops back down. Error message 'No page was found in the feeder' Running Win XP SP3 & CapturePerfect 3.0 scanning a 4 page document. When attempting to ...
...tray not lifting I have put my document in the feeder, when I run the scan, I can hear the scanner want to pull the paper,but the tray does not lift. I ran the "count only" and that does not work ...
...some reason the scanner has stopped multi feeding real pain can anyone help Is the document tray raising? If that is okay, then clean the rubber rollers with a damp cloth. If worn out replace. S. ...
Question about Canon DR Office Equipment & Supplies
...All other numbers in green/gray color. the password to get in to the Quma tool = quma Red 1 and 3 are good! 1 is the home position sensor for the document lift tray and 3 means the top cover is
Question about Canon DR Office Equipment & Supplies
The documents are scanned but dont appear on later inspection, or if they do they are just a horizontal line across the middle Hi, We have about 20 of these scanners and use Capture Perfect 3.0 on all
Question about Canon DR Office Equipment & Supplies
...document lifting table is not lifting, it makes a noise trys lifting then stops, then a "no page was found in feeder" message appears on my computer. At the bottom of the tray there is a ...
Question about Canon DR Office Equipment & Supplies
...document board assy (metal part under the plastic tray).*** You said you checked all the connections, but I would recheck them, and trace them all the way through the metal lift mechanism...the ...
Question about Canon DR Office Equipment & Supplies
9080c fails to scan single page; has trouble scanning a batch. 9080c will scan a batch of documents but sometimes will fail to feed a page in that batch. The scanner is not jammed, it is just that the
tray. Incase there is a document thats stapled, while one sheet is going in, the other sheet will get lifted because of staple. Thus when there is obstruction in the LED sensor, it is presumed to be a
216 questions posted
Usually answered in minutes!
58 Questions
64 Questions
33 Questions
38 Questions
28 Questions