Compaq AlphaServer DS10 "power" Questions

No display DS10 running OpenVMS 7.3, it was powered down 3 months ago. On power up no display, no consol output on the serial port. Any ideas would be appreciated? hi sucb Clear nvram and replace ...

...os_type NT <ret>The alphaserver should then automatically the BIOS screen whenever you power ...

DS10L AlphaServer CPU Fan Failure Symtoms: System powers on but fails the self test and wont reach the SRM prompt. Event and FAN LEDs are lit Actions so far. Retrieved status from RMC with CPU Fan: ...

daughter or addon card(s).. ..plz do check the following as in order:.. the Hardware part:.. 1)a)in power on mode, open/unplug the data/vga cable of the monitor from cabinet..see if raster or 'osd' is

Poweredge 2600 power supplies in red Hello, One day my server didn´t start. Call Dell support and told me the two power supplies need replacement because a red led where flashing on both. By two power

ML350 G4 will not boot. System was running but became unresponsive. Powered down using power button. Now no response to pushing power button. No Leds lit anywhere. Fans running on power supplies. Try ...

how we can switch on CA01022-0550 power supply ? Unlike a PC Power Supply, this type of server power supply does not have an on/off switch. It will turn on when plugged into a compatible server and ...

hi, this morning we experienced power outage in our location, after 5 hours later power came back, but not our main server IBM System x32002. I checked the monitor and there is power. I check the ...

how do i reset the power supply on my poweredge 2600? Resetting the power supplies isn't necessary. Once one of the ptwo power supplies fails, the second power supply automatically takes over. Also, ...

will not power on if server is powered off. It will not power back on unless you unplug the power cords and repug them back in. Sounds like a power supply is failing. Swap it out with a known good one