Compaq Presario 700 470024-192 Notebook "disable ahci mode" Questions

the detect the hard disk drive. Enter BIOS Menu and look for Hard Disk SATA IDE setting of AHCI. Disable this by setting to Compatible mode. XP does not support AHCI mode. Please rate me if this works

...disable the ahci and select sata like ide or ide compatible ..or ide mode..and press F10 to save the settings and restart ..In this moment if you have a operation system and its functional it will ...

...disable the AHCI, how do i go about doing this? Installing XP on a SATA drive requires an additional step: http://xphelpandsupport.mvps.org/how...ws_xp_on_a.htm However, Most newer BIOS allow an ...

...AHCI mode in BIOS again. If you want to configure a raid array. set to RAID similarity. When finished settings, you should press enter to accept it, and save to CMOS before restart your computer. In ...

...disable the AHCI feature..and select to run sata as ide..or ide compatible ..something like that ..(the feature may be slightly different named ) ..after making the changes..just press F 10 to save ...

...disable the SATA or RAID Connection. Don't worry that you are thinking it would not detected the SATA HDD by Bootable Disc but it is. Then follow the instruction. Good luck! If i am helpful to you ...

ahci mode..you have to disable it and use the sata as ide or ide compatible ..in order to make it work and see the hard disk ..Usually when it is stuck on the logo screen there are some advices writen

...disable ahci mode) I'm not sure how it will appear ..but you have to look under the bus mode..where the hard disk is seen ..It will appear as ahci enabled..and need to be disabled or ..will ...

...AHCI features, it's recommended that you disable this BIOS feature. This allows you to use the native Windows XP driver. You won't need to load the SATA controller driver during the Windows XP ...

...disable ahci this are sata controller modes disabling it might render your computer not bootable, there are other options like IDE and raid setup refer to your manual if what setup works best for ...