...objest are stuck aor what not? We had this problem with a new washing machine. Turned out the solution was to switch from a BIO washing powder to a NON-BIO!! Didn't fix the existing holes though
my washing machine is making noise, like a metal is stuck Check holes in drum. Possibly a brassiere wire through hole.
Question about Ariston Technologies Washing Machines
...washing and emptying quietly. When it goes into spin and slowly gone very noisy, perhaps like a grating sort of noise, but no strange smell. I have tried spinning slower but it is the same. maybe a ...
stuck in the little hole that the door pin goes into. Check to be sure there is a metal piece visible in that hole. It might also be bent to one side, or broke off. The pin on the underside of the lid
...many times these machines use a solenoid activated lock pin that goes into a hole in the door opening and if something gets stuck in the hole or if the door isn't closing all the way then it can't ...
...Thanks. you have something stuck inside the Washing machine pump assembly,you could tip over the machine disconnect the drain holes and look in the pump and clear what ever is jammed inside.
...washing unit makes a lo9uder clank and then a high pitched noise as it spins. Check to see if you have a bra underwire or nail stuck in the spin tub. Look around inside the tub looking for something ...
...stuck on the inside bottom of the door and water leaks out but pull open the rubber boot and run your fingers all around it to check for any holes.you can remove the bottom panel and then run the ...
...tub seal. Check that there is not a leak in the outer tub somewhere I had one that had a nail stuck in one of the holes in the inner tub and rubbed a hole in the outer tub. Have fun I hope this
542 questions posted
Usually answered in minutes!
165 Questions
26 Questions
17 Questions
