Admiral AW22 Top Load Washer "lid switch model" Questions

...lid switch. The lid switch on a top-load washer is a safety switch that detects whether the top-load washer lid is closed. The lid must be closed when the basket spins; some top-load models require ...

lid switch problem My kenmore elite washer model 100.24942301 is having an issue with the lid switch. We close the lid and the machine doesn't start. IF we lift the lid and drop it, it starts washing.

...lid switch Hello, What is the make and model number? What is the Make and Model of your Washing Machine? Usually you just remove the panel near the lid switch, to gain access to the lid switch. Some ...

...lid switch. If the washer fills and agitates, but stops at the rinse cycle, this is a common symptom of a lid switch malfunction. The following link explains how to access and/or replace one: ...

lid switch. This is a tell tale symptom of a lid switch gone bad. The washer fills, agitates, but will not spin or drain. The lid switch is located along the right hand side of the lid opening on most

...lid switch may be out of adjustment or broken. Open the control panel and locate the lid switch.With the control panel open look at the lid switch mechanism as you open and close the lid. Make sure ...

...lid switch is working. On most models the lid switch will prevent the washer from spinning with lid open. Some models will stop once the washer fills with water. Depending on what brand you have ...

...lid switch malfunction. If the washer fills, agitates, then stops at the rinse and won't drain, or if the washer does an initial fill, then stops, this is a symptom of a lid switch malfunction. The ...

...lid switch. The symptoms of your washer stopping at the rinse cycle is a commonly caused by a lid switch malfunction. The lid switch is usually mounted under the washer top casing, on the right hand ...

...lid switch. If the washer fills and agitates, but stops at the rinse cycle, or, if the washer fills, then stops, this is a common symptom of a lid switch malfunction. The following link explains how ...