Question about Advent Computers & Internet
...power plug the voltage should be steady and the reading should be slightly higher then the voltage that is printed on the label on the bottom of the power adapter. If the voltages fluctuates as you ...
...if it could have gotten damaged from that. My power plug that goes in the computer gets hot enough to melt the plastic ring on the end of the plug. so i am going to get a new power board and try
...off the current. Also, when you are plugging an adapter in,,do not have it plugged into the wall power outlet when plugging into the laptop,,,plug into the laptop first and then plug into the
Question about Toshiba Computers & Internet
power plug on the adapter with a multi-meter, the voltage should be slightly higher that the voltage that is printed on the label on the bottom of the power adapter. If the voltage is zero or very low
Question about Compaq Computers & Internet
The power cord is plugged in. The power icon says The power cord is plugged in. The power icon says "plugged in, but not charging." We have plugged and unplugged it several times, but it has not ...
...plug in, try to reboot. If it powers up, open Control Panel, Power Options Power , set to High Performance, open Advanced Power settings, set Sleep and Hibernate to Never, Adjust other Advanced ...
...power button shorted, Does it operate when not plugged in? The plug jack on the back where the pc would be plugged in, sometimes loosens and needs to be resoldered too. If the pc works when not ...
Question about Compaq Computers & Internet
plug-in power cord then power on. your battery may be completely drain and your power adapter can't give enough supply to power up your laptop and charge the battery at same time. if doing so power on
Question about Compaq Computers & Internet
...power plug mode. When the laptop didn't switch to power plug mode i've notice a small and faint beeping sound on my power supply box cord? Thanks Check these settings first. In a clear spot on the ...
power plug in the laptop's power socket. If the power/battery LED light flashes and in a certain position this LED light stays firm, then the power socket is either faulty or it has a dry solder joint
791 questions posted
Usually answered in minutes!
3,409 Questions
2,234 Questions
1,799 Questions
796 Questions
680 Questions