Compaq Presario 5000US (D70008-261) PC Desktop "5000 front panel" Questions

...5000. Hi, I can help you with this. Are you trying to remove the cd-rom drive bay plate or the front panel of the tower? i dont know how.. Remove two screws and open the computer metal side cover. ...

...front panel con Have Presario 5100US PC, replaced motherboard, need pinouts for usb and front panel connector (reset,hd led,pwr). here is the solution to your problem: ...

...front panel??? is there a battery light on the front panel? if so,when lit, does this mean low battery(internal battery)?also a clicking sound is present. aq clicking sound may be comming from your ...

...front panel is usually held in place with screws that are tightened from within the case and are only removed if you have panel damage. If you remove the wrong side panel, you will run into a metal ...

...5000 ON OFF, RESET AND LIGHTS ? WHERE CAN i GET THEM. Hello mr_billsauto The Compaq and HP cases have a block connector for the front panel. On the main board there is a set of pinns usualy labled as ...

5000 is 5BW120.-It is not just a simple unscrew situation I found the disassembly info on the HP websight And There seems to be 2 configurations under the 5BW120 and they show one and I have the other

...front of the computer box off. Don't have manual and have to replace disk drive? Compaq Presario 5000 series 5001r You take the side off to replace the HDD take the side panels off of the computer, ...

...5000 I need to get the front USB ports on a Compaq Presario 5000 working. There's a plug on wire leading from the front panel, and a place in the motherboard, but they don't match. What I need is ...

front panel of 5sw398 You can but have to unscrew from within case, Although be careful dont want to break anything. Try opening the case up on both sides and looking towards the front. A lot of times

...5000 series The Compaq desktops use the same basic case. Before opening the case, disconnect all of the cables attached to the back or front of the computer. Remove the two screws that hold the side ...