Question about Zanussi Dishwashers
lights) indicating that the set programme has been cancelled and the machine is now in setting mode. 2. Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1,
Question about Zanussi Dishwashers
programme has been cancelled and that the machine has returned to setting mode. It is now possible to select another washing programme. If a new washing programme will be selected, check that there is
...turning off the power switch, then while holding down the 2 black buttons on the right simultaneously, turn on the power switch. Mine defaults to to the 65 degree programme when I do this, but at ...
...programme fails to to start. Only by turning the slector knob to 1 and returning to 3 (my preferred programme) and pressing the Start/Stop button again will the machine operate. I have checked the ...
... in which case its cheaper to buy a new one or check the solenoid at the water entry point to the machine , this has to activate and stop in order for the machine to proceed through the programme. ...
programme. Light jus flashes. Stopped. Cannot reset. tried turning it off at power. Still cannot reset. Any ideas? You have a warranty, call the seller and ask how to use the limited warranty you have
...programme My Eco light was flashing fast ,and the drain pump was running continuasly.It turned out at the drip tray was full of water and micro switch add activated . i tipped the machine forward ...
...programme lights are illuminated, therefore will not allow a single programme to be selected and also then will not allow the machine to start. Hardly used and not that old. I have removed and looked ...
Question about Indesit Dishwashers
...turning my indesit idl530 on a fault code appears When i turn my indesit idl530 Dish Washer on, the pump operates, (I have checked that it is working by filling with water - the pump empties the ...
...programme on to wash. Unplug at night if doesn't work change the L subport conversion chamber and remove the restricter plate There's a water leak inside, causing the anti[ flood micro switch to ...
132 questions posted
Usually answered in minutes!
23 Questions
3 Questions