...error 016-387 I have a xerox docucolor 3535 with build in fiery. while i was printing the printer displays me the error code 016-387. usually the error that begin with 016 are connection errors or ...
error still occur? Replace the MCU Board 1. Remove the Rear Cover 2. Remove the Right Side Cover 3. Remove the Left Side Cover 4. Remove the Controller Shield 5. Disconnect the 18 MCU Board connectors
...016-799 error code mean? 016-799Wrong combination of print parameters, like selecting to print on custom size paper and setting [Auto] for [Paper Source] on the printer driver and [Auto] for [Paper ...
...email. Every attempt receives an error code 016-781 even though I've checked my STMP, pinged my IP's, checked LAN connection & all ports and confirmed machine address? Any ideas? Iot controller ...
Question about Dell Office Equipment & Supplies
...error: 016-337 - reseat mpc for my Dell 5110cn printer. What's wrong? You will need to replace the following parts.Multi Protocol Card and the Network Controller Card.No need to call tech support.Its ...
...error code comes up and ask to restart printer but it still comes on The 016-317 on this printer refers to the printer not being able to communicate with the MCU board. This is what you should do. ...
Question about Xerox Office Equipment & Supplies
...error indicates the scanner is not installed. Check the connection from the scanner to the main ess board and reseat if necessary. If cable is damaged, replace with part number 117K38440. ...
...error points to the controller card. Basically, it needs reseated (removed and reinstalled) or replaced. Follow this decision tree for help on reseating. It's not very hard. ...
...error 016-310 Where do I locate the controller card The controller card on the 5100CN is located at the rear of the printer. Rotate open the paper tray cover, remove the 3 screws securing the ...
Question about Xerox Office Equipment & Supplies
error 016-781 comes whenever we try to do it.kindly help Set "Sub-net Mask" and "Gateway" of the main processor correctly. From the destination server, check that you can identify the M/C with "ping."
410 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions