Dell 922 All-In-One InkJet Printer "power light blinking" Questions

...POWER light and the CHARGE / ERROR light is blinking and beeped 5 times. When I pressed the RESUME bottom, it beeped 5 time the blinking on the power and error light continue to blink. Unplug Power ...

...light and Power light keep blinking The green power light and the orange downward arrow light keep blinking. When I push the orange downward arrow, the cartridge slides to the left, then back to the ...

...light. The green light is the power light. If the Power and the Resume light are blinking alternately, then you have a paper jam somewhere in the printer. remove the paper jam and you should be

...light The power button shows a blinking red light and printer does not respond to anything. I unplugged the power cord and re attatched it and got a blinking green light for a couple of secands and ...

POWER (top) light is on. The printer is idle. The printer is ready to print a document. The POWER (top) light is blinking. The printer is busy printing. Allow enough time to print. When a document has

...light blinking Try to Reinstall the cartridge , if the blinking continue , try to remove ink then unplug the power cord and reconnecting power cord with ink then see blinking for ink , then install ...

...2. open front door 3. press and hold continue and cancel buttons 4. power back on 5. wait until light sequence stops om error 6. power off and back on. this resets factory defaults on the

...Light Blinks at power up and LCD display is blank When I power up my T65 the Attn Light blinks, the printer beeps three times and the LCD display remains blank. Is the printer dead? if orange light ...

...power light keeps blinking rather than being solid so I could use the printer.. Instead it keeps blinking and none of the things work including scanning ,printing or more..nothing..it just blinks. ...

...power light is blinking continuously & can't able to print any test pages ? please let me know Welcome to Fixya. The blinking power light can indicate multiple problems. So Please refer to the User ...