Question about Dell Office Equipment & Supplies
...copies What is causing dark vertical line on photo copies? If you are running your copies through the document feeder then see if the line goes away if you make a copy directly from the glass. If the ...
Black smudge on middle of each copy I have a canon pc770 copier that produces a black horizontal line, 1 to 1.5 inches. even when nothing is to be copied. Turning the automatic button off and ...
dirty copies The copies come out with lines and dark smudges that are always in the same place. How can I clean it? clean corona wires--heater roller and if did not success change the drum.
...lines on copies and on drum There are a few things you can do to troubleshoot this problem. Be sure you are using new, clean paper Clean the copier's paper rollers, the marks may result from a dirty ...
...Dark Smudge" upper left corner from scan Help! The scan function leaves a triangular darkened smudge on documents. This always occurs on docs auto-fed and, after one warm-up copy, appears on all ...
Question about Dell Office Equipment & Supplies
...lines on a scanned document is from whiteout on the glass where the page is scanned when using the document feeder. If there is a clear mylar sheet on the bottom of the document feeder, the whiteout ...
copies are coming out with a dark horizontal lines and printer is making a rather loud sound when paper is in printing process. Two things that can cause print quality issues and noise. 1. The toner ...
Question about Dell Office Equipment & Supplies
...when the glass had some smudges here and there, I never had a yellow stripe problem! Scanner bulb is bright and even the entire length of bulb (no dark areas) so I don't think it is the bulb! ...
Question about Ricoh Office Equipment & Supplies
...copies as well, so I don't think that's a factor. Any help/suggestions would be appreciated. -- Jimbo Where best to look will depend a little on the nature of the smudge. If what you're looking at is ...
...dark or bold) it usually means that the current in the drum is not correct, or the coating on the drum is worn. Take the cartridge assembly out and separate the drum from the cartridge. DO NOT TOUCH ...
598 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
441 Questions