Belling XOU492 Electric Double Oven "turn lower" Questions

...turn on the lower oven first, the cooling fan comes on and the lower heats with no problem, but then if I also turn on the upper after turning on the lower, no F34 error code for the upper as the ...

lower oven appears to turn on but never increases in temperature. The fan/blower turns on- it "acts" like it is working but doesn't. I had a service person come in and he said it was the realy control

...after being replaced Model numberJ BP30B A4AD, top elements work, broiler element works when oven turned on but the lower element not. I replaced lower and still not working. I took yellow wire off ...

lower element(bake) was not working but the top(broil) was, so I went and replaced it. But now I am not sure what to fix, because I turn it on and it's still does not work, control board seems normal,

...turn the lower oven on. If it does not blow, replace the lower element with a new element. If it does blow, Check the wiring to the lower element for continuity to the frame of the range. If you get ...

...be replaced without removing the oven from the wall. Yes, replace the lower element by first turning off the circuit breaker to the oven (110V is still to half of the 220V element circuit even ...

My GE upper oven (Model # J KP27G002BG) just stopped working. No power light when turned on. The door light works. The lower oven works. Any ideas? The lower burner in the top oven does not work, ...

lower oven quit heating. None of the elements heat. I ran the diagnostic program and no error codes are shown. Onboard diagnostic testing leads to no elements heating and no fans running. First try to

...on any cycle Upper oven fine NO ERRORS lower oven wont heat on ANY cycle, bake, broil, clean turned off / on power no change Possibly a tripped thermal fuse. Should be located behind the panel ...

...turn the oven on. During pre-heat, you should start to see those oil drops generate some smoke, IF the lower element is working properly. If it isn't - voila'.!! Problem is with the lower element / ...