Dell Dimension 2400 PC Desktop "cover monitor screen" Questions

...monitor to your PC) is properly connected. if not -unplug your PC -remove all devices connect to it(make you remember where each component id connected) -remove the cover -unscrew the Graphic Card ...

...screen, i have no control over this.i have access to the wiring at the bottom of the monitor panel, I want to id which ones to cut to remove the monitor control options never try that please beeter ...

...cover of the CPU. Try to remove the video card on the mother board of the computer, check the video card if hot or clean the card, maybe there are dirt and dust to it. then reinsert the video card to ...

...MONITOR HAS A GREEN SCREEN DELL DIMENSION XPS T550 What I get from your post is that you have a green screen covering up your desktop, thus preventing you from doing anything on your PC. If this is ...

...monitor power button will turn green then amber. Power on the computer tower. Try to check if you were able to see the Dell blue logo just right after you power on the computer. If you were able to ...

...monitor. If it does not come on then somehting might hve possibly damaged all of the epuipment that was plugged in like a power spike on the electrical lines going into your home, this would be very ...

...monitor while the board is accessible (don't touch anything) and pushing the button on the board to power it up - if it works pull out the power plug and re- assemble . Then when it is plugged in it ...

...monitor that wasn't it, disconnected the video from the on board video output and installed a pci express on it and still nothing everything is fine from the power supply to the fans, etc... Can ...

Monitor And Power Cable i.e. something like internet, printer, USB PEN DRIVE or External Hard Drive. 4. Restart your system and start tapping F8 key on the keyboard until the DELL LOGO passes from the

...cover to press the button directly. 2. or else...STEP: Check the Power Button LED on the Front of the Computer (on Blinking yellow) Initial state of LED at power up. Indicates system has power, but ...