Dell PowerEdge 1300 Server "perc raid" Questions

...has failed. I would replace this first as RAID controllers are less expensive than replacing the system board, or the server as a whole. Suggested: PERC 5i (RAID 0/1/5) or PERC 5iR (RAID 1 or 0

PERC (PowerEdge Expandable Raid Controller) or SAS Controllers (Serial Attached SCSI) generate beeps to alert failures on the RAID sub-system. From your description of the issues (when the beeps start

RAID menu will either be CTRL-A (if you are using the onboard PERC 3/Di) or CTRL-M (if you are using an addin PERC 3/4). If you are not seeing either of these options, then you may not have it enabled

...PERC RAID ... As far as I know, the PERC BIOS (ctrl M during power on, as I recall) is able to 'recover' from a 'broken' mirror ... HOWEVER when you replace the first 80Gb with a 200Gb the PERC BIOS ...

...Perc RAID controller in a 2600 doesn't support RAID 4. You can do RAID 0, RAID 1 and RAID 5. With 3 HDD's your best bet would be a RAID 5. Mirroring is RAID 1 (which would only use 2 of the drives) ...

...PERC RAID controller. There you need to manage your physical/logical volumes. Chances are that either you had a drive failure or the metadata on your RAID volume (JBOD?) was corrupted. This is a ...

PERC 3Di one drive is failed how do I remove and replace without losing the container? Replacing the drive does not remove the container on the RAID controller. If the drive has failed, and you had a ...

can I install sco open server 5.0.5 on poweredge server 2950 which is having PERC 6/1 raid controller Hi , You can move a program from sco openserver 5.04 to newer platform it supports RAID controller

...Raid 5 Configured with Three 73 GB HDD on Perc 3 DI , Now one of the HDD is Having problem , Can I Add 146 Gb HDD into Existing Raid 5 Configuration In raid 5 yes you can, yet you won't use the ful ...

...RAID in CTRL-C (SAS 5/6) or CTRL-R (PERC 5/6) before even loading the driver will help. You will also need to download the Dell install/upgrade disc for your 2950. You can reach the correct page by ...