Dell PowerEdge 2300 Server "hard drives lights" Questions

hard drive leads. Remove and replace all the scsi drives and generally check for loose connections. If this does not work you will need to post more infomation. Verify the drives physical connections.

hard drives in my poweredge. how do i get it to copy from the good hard drive? Can you describe the sound it makes? If it's one short beep that's OK. If it's anything else, can you tell us the pattern

...hard drives, or mother board , or ??? help. Thanks Mark You must figure out if there is a harddrive controller running the drives. If this is a striped array I suggest calling support. Pulling all ...

...Hard Drives is not working and when we take it out for ten or twenty min... and install it back the problem solves.. RAID1 (Mirroring is confiugred on our both hard disk) please provile an effective ...

hard drive bay 2 to four being the new bay for the new storage. How ever it is not seeing the existing two drives again A Blinking Amber or Yellow power button means that the power supply is receiving

...that could be an issue: a problem with power supplies, fans, system temperature, or SCSI hard drives. Install the Dell Open Manager software to run diagnostic. It will tell you what needs to be

drives spin up, there's no power to the cd drive but the power LED still keeps blinking which implies it's still in the standby state. I'm assuming the server is in some sort of 'ready' state for IPMI

...coming from one of the processors. Machine is running fine, with beeping exception. Could this be a hard drive issue? Will the drive have a blinking light if it's working fine? Thanks, ~Mike When a ...

...hard drives but the CERC-6 card has unfamiliar PCI slot, so thwarted there. Gets all the way to "BMC Setup" then hangs I would recommend you boot to your 2000 CD, load the RAID driver for the CERC, ...

Turn the computer on, steady red light and beeping. Hi, I just changed the hard drive on my computer, and now when I turn it on, it spins up, and the hard drive light is a steady red. After a second, ...