Question about Mitsubishi Office Equipment & Supplies
...lamp or what? Thanks. your projector status means the protection circuit is working or the lamp is in an abnormal condition. --wait until status indicator goes out and press power button. ---if the ...
Question about InFocus Office Equipment & Supplies
...by removing the battery under the projector lamp? Would appreciate advise/help from anyone with similar experiences. Thanks! Jerry that model has a history of bad ballasts. you'll need to replace
...lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started out green begins to flash red. The lamp does not turn on. The lamp ...
...technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need
Question about NEC Office Equipment & Supplies
...lamp to let the projector know it's safe to power on. I've attached an image to help out. if the status light is blinking red: 1 time- lamp cover or housing error. check lamp door. 2 times- ...
Question about NEC Office Equipment & Supplies
lamp won't light / status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts ...
...projector is telling you that the lamp needs to be replaced. In "eco mode", when the power is green and the status is steady orange, that is the error message. In "high brightness mode" the status ...
Question about Office Equipment & Supplies
...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ... Maintenance Indicators - ManualsLib www.manualslib.com > ... > Notevision PG-F212X > Operation manual The warning ...
...lamp from another projector, same problem occurs. Any ideas? I tried your solution of: For VT570/VT47 Press and hold the power and the exit buttons on the remote control simultaneously for a minimum ...
Question about Epson Office Equipment & Supplies
...lamp on epson emp x5 1. Make sure, your projector is on standby. 2. While holding down the projector's Comp Sync + and Comp Tracking + buttons, press and hold down the power button. 3. After ...
1 questions posted
Usually answered in minutes!
21 Questions
23 Questions
30 Questions
27 Questions
15 Questions