Creda W120VW Front Load Washer "cant pump pressure" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...cant find manual,what is problem? Fo5 is a pressure switch fault; areas to check are pressure chamber for blockage, pressure pipe sump and pump. Click on a link for more Hotpoint, Creda and Indesit ...

Ad

or so yes it cant cause this problem and no your pressure switch will reset its self when the machine is empty of water so perhaps your machine it blocked up traps or filters on the pump / waste end..

Ad

...pump still doing same :-( what else could it be? The error code you are seeing means that the Pressure switch is stuck and it cant tell how full the washer is so the unit stops and flashes all lights ...

Question about Hotpoint Washing Machines

2 Answers

pump/filter as looked over the machine but cant find it???? An F-05 error message means that the pressure switch is jammed on empty or a problem with pump. The fault is associated with drain out (pump

Question about Hotpoint Washing Machines

1 Answer

...cant get it to spin or pump out on a hotpoint aquarius wmf50 F05 means that the pressure/\water level switch is jammed on full. Remove lower rear panel of washer. Locate and remove the large black ...

Question about Washing Machines

1 Answer

...cant hear the pump running from inside the house so not sure if it was running constantly while trying to do laundry or it tripped before that, the laundry was soaking wet so it happened during the ...

Question about Kenmore Washing Machines

1 Answer

...cant get it to spin or drain. The airtight hose between the tub and water level switch is probably frozen also. Therefore it is rendered useless and not allowing pressure to shut down the water and ...

Question about Hotpoint Washing Machines

2 Answers

...the pump filter, or pump, outlet pipe, or U-BEND. Don't forget to rate! i have a hotpoint aquarius 740 when i press button to start wash all lights start flashing and i cant turn it of , any help

pump. If there is no water in the machine then the problem is either the pressure switch, the hose going to the pressure switch, of the control board. The pressure switch is on the back by the control

Question about Washing Machines

1 Answer

cant pump out, the machine may try to refill but it is already still full from last wash , causing the error code to flash. Check for pump jamming up with foreign objects, or hoses blocked with a sock

Not finding what you are looking for?
Creda W120VW Front Load Washer Logo

115 questions posted

Ask a Question

Usually answered in minutes!

Top Creda Washing Machines Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39390 Answers

Are you a Creda Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...