Epson Stylus C60 InkJet Printer "paper light ink staying" Questions

...light stop flashing and stay on. The red light staying on means paper ran out, ink ran out or paper is jammed. Take the paper out and put it back in. Take the ink cartridges out and put them back

...paper jammed and ventilation is sufficient) it then stopped flashing but the red stayed on. Then the power switch (yellow) stayed on as well. Also tried to replace the both ink cartridges to the new ...

...paper and red ink light flash alternately and green power light is off possible problem: Paper may be blocking movement of the print head. Turn off the printer, then open the cover and remove any ...

paper feed, but cant get lights to go off, so doesn't print. Hi geoger, Can you give more detail about the lights and if they flash and in what sequence. The most likely cause is that your machine has

...light in the middle stays on. When there is paper in the tray, it will feed the paper and print symbols and numbers in the upper right hand corner of the paper. It will go through all of the paper in ...

...paper and ink lights flash and the head just won't move. It in fact is locked up as I can't move it, despite forcing with some strength. Any help would be appreciated. Patrick [email protected] Your ...

...light stays on..loud noise made as carriage moves to right.. paper is not jammed..ink is fine...pushing ink replacement button gets no movement......is the nylon ribbon stripped? If you don't respond ...

...paper in the printer, the red light means you have an empty ink cartridge. Because both things are happening at the same time, here's what you need to do. First click start. Click printers and faxes. ...

...paper jammed inside. The green power light goes off and the maintenance red light stays on. Any advice ? Thank You it could be the coagulation of ink in between the cartridgebetter dip it in mild hot ...

ink, but the power & paper lights flash, and both of the ink-out lights stay on. The paper feed is not jamed and seems to feed all right. When I try to print, nothing happens, lights stay the same