Question about Epson Stylus Office Equipment & Supplies
...ink cartridge is not fully seated, take the ink cartridge out, then replug it back in. The only other thing I could think of would be that the print heads have been clogged up somehow, or the actual ...
Question about Epson Stylus Office Equipment & Supplies
...the x is still coming on the ink cartrigde. I don't know if this has anything to do with it.... Please help! Yep that's the problem. It hasn't recognised the cartridge make sure it's inserted
...ink cartridges. The whole cartridges cannot be fully exposed. Here are instructions on how to change the printer cartridges in an Epson Stylus. First open the printer cover. Look for the button with ...
...ink starts to slowly leak out take the cartridge out of the water and dry it using a soft cloth to "Q-tip." Then place it back in your printer and run the print head cleaning utility that comes with ...
Question about Epson Stylus Office Equipment & Supplies
...ink carriage lid is firmly locked down, check along the path of the carriage for any foreign/loose objects. If the carriage moves when you switch it on, pull out the power cable when it is across to ...
...coming from the cleaning pump and it willhave an open end on it. This is the tube that delivers ink to the wastepad. Use a piece of coat hanger wire or equivalent, and fish out this piece oftube. ...
ink cartridge in, then you can try soaking the print heads for 24 hours (or more), as follows. Turn the printer on, and as soon as the print head moves pull the power cord out of the back, or turn the
...coming from the cleaning pumpand it will have an open end on it. This is the tube that delivers ink tothe waste pad. Use a piece of coat hanger wire or equivalent, and fish out thispiece of tube. ...
...fully into its parking position so that the cup full of fluid comes up over the print head. Do not turn the printer on at any stage in this process. Leave this for at least 24 hours, then turn the ...
Question about Epson Stylus Office Equipment & Supplies
...ink is put on the paper although the paper runs through like it should. It sounds like blocked nozzles to me, providing you're SURE you have good cartridges, properly installed (you did take the ...
38 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions