Epson TM-U220 Matrix Printer "auto" Questions

Auto cutter does not cut automatically I tried to use tm-u220 to auto cut my receipt, but after the last line printer supposed to cut the page, but it stop and error light start flashing, If I turn ...

I have a TM u220 printer. I can't get it to auto cut. Any ideas? Is there a code? TM 220a and TM 220b should come with auto cutters You have to unscrew the metal tab under the printer, you will find ...

TM -U22O PRINTER PRINTER WANT FEED AND AUTO CUT ANY SUGGESTIONS Send ESC/POS Secuences Install the correct driver The send command is: 0x1d "V" 0x41 0x00

...goes off and it prints and stop without cutting the paper...TM 220a and TM 220b should come with auto cutters You have to unscrew the metal tab under the printer,

auto cutting not working The manufacturer's seem very protective of their information for their POS printers. I have been unable to find on-line manuals; the only posted information sees to be ...

unfinished printing cut-off The printing was not finished, it was cut-off by the auto-cut. Are you using the APD304e driver for your printer? It has option where to cut paper, if not you can download ...

how to auto tear paper after printing receipt is completed. I am a software engineer. My client is using epson thermal printer TM-T88II printer and is using a software by which receipt is auto cutted ...

...Programs and not through the Driver Utility. I also set Dip switch 1-1 to on which enables auto line feed with parallel interface, with other interfaces this switch changes other things. i

clean auto cutter If it is older than 2 years it is out of warranty. I could not find anything on how to clen the cutter. You may dowmload the user manual here or check with the service dept to ...

you may Visit their website at www.support.epson.com Hope this helps. All of these do this while in auto-test mode. Simply push the auto-feed button again to finish the test and resume normal use