Epson LQ-2180 Dot Matrix Printer "tractor feed printers" Questions

...carbon paper between the sheets.  The only solution that I know of is to buy a printer with a tractor feed  and pre-printed fan-fold forms with tractor feed strips on the sides of the

tractor feed only.Does the paper get damaged when you try to feed or reset the page beginning, What we are looking for is a piece of one of the sheets loged in the pinch roller.Also check the pressure

...tractor feed and having labels in the printer, pressing LOAD/EJECT used to move the first label back to the tractor: pressing ONLINE fed the labels to the correct start position. Now pressing ...

...your printer-->Properties See if there is a "Device Settings" tab and click it. It should have Auto, Tractor or Manual feed settings. Click Auto's down arrow for paper size selections. Thank ...

...tractor-feed Z-fold? If so, you may have a damaged sprocket drive. If not, you need to remove the platen and check for paper scraps in the paper path and if you ever use the printer with labels, you ...

...for several seconds; then turn on the printer again check if the paper selection lever is on rear tractor mode and not on the single ...

platen & tractor feed areas. Printhead home will be over on the left side in the printhead movement area. Logic board defects could likely cause this same issue, diagnosis here could be more difficult

...tractor feed, and every 12th label is missing. I have to reprint them manually one by one. Any ideas on what the problem could be? I tried going into the default-setting mode, the printer beeps once, ...

...tractor feed.. help When a paper jam occurs during printing for some reason, the printer beeps, displaying the message in the display. When a paper jam occurs, remove the jammed paper using the ...