Epson LX-300 Matrix Printer "red light feed blinking" Questions

...RED, ONE ORANGE) ALSO KEEPS BLINKING. pAPER WONT AUTOMATICALLY FEED CONTINOUSLY. THE ONLY WAY TO FEED THE PAPER IS BY TURNING THE FEED KNOB MANUALLY WHICH IS LOCATED ON THE SIDE OF THE PRINTER. EVEN ...

RED, ONE ORANGE ALSO KEEPS BLINKING. pAPER WONT AUTOMATICALLY FEED There are several reasons for this problem. One is the paper tray is either too full or not closed properly. There is a sensor and if

...red light. I can push it again and get the same result. When I push it a third time, the label will advance to the next seam between labels and stay green until I press it one more time which it goes ...

Red light blinks indicating a paper jam. Prints fine if single sheet thru bypass slot. Not picking up paper indicates either a worn nip roller (rubber on feed spindle) or you have a broken gear in the

Zebra TLP 2844-z printer and when I turn it on the light is blinking green/red hold feed button and release during 4 blinkings to reset. good luck

light changes to red and nothing prints. Sometimes we can open the front of the printer, close it, and then it will print. The speed light is orange and the connection light (below speed light on back

will turn orange then blink red 5 times. Release after the first red blink and before the 5rd. 4. If the ribbon is properly installed the light will turn green. If it is not it will turn red and blink

red light blinking, first orange then red, toner blinks green Samsung ML 2010 After having printed around 150 pages (the printer stopped for a short while after 50 pages and did at one page stopp ...

...red light flashing The last light on the farthest right of the printer is flashing, and it will not prit anything at all? Use the system monitor to check if you require to replace on of the color ...

...RED LIGHT SHINES (NEXT TO THE GREEN ONE THAT SHOULD ). IT STARTS PRINTING ONLY AFTER I STRIKE THE FEEDED PAPER INTO THE PRINTER'S FEEDING TRAY. I HAVE TO DO THIS FOR EVERY SINGLE PRINTED PAPER. IS ...