Epson LX-300 Matrix Printer "flat white cable" Questions

...to print not in draft mode... it should be in graphic mode... it prints slow but it surely gives you what you want. try to replace the printer head cable, the flat white cable connected to

I can find this part for purchase? Thanks a million. Have a good day. This is no sparepart and belongs to the printhead which is only sold in one part (Flat white cable, printhead and printhead cover)

...seconds than it goes off, Than I got ERROR F5-02, Thank you. "F5-02 : Exposure lamp blown" check scanner flat cable,exposure lamp,exposure lamp section,i hope it should be change flat

...white flat cable connected to the laser. First of all , open the front door of the machine and remove the cover to the laser unit .remove the flat cable and and clean the alluminium surface with ...

...white, red, green & blue. if not happening replace your CIS. Apply lubrication to the bending portion on the flat cable and bottom plate. if still having problem replace your CIS. PRINTAR MF4320 ...

...white flat ribbon cables off the main circuit board. 4- Plug in power source and turn printer on. Wait till you get a error message and push "Ok". 5- Unplug power source. 6- Reconnect the flat ribbon ...

...white (or black, in my case) flat ribbon cables off the main circuit board. Plug in power source and turn printer on. Wait till you get a error message and push "Ok". Unplug power source. Reconnect ...

White, Red,Green &Blue. If CIS is not responding, it's time to replace the CIS unit. If the CIS is responding properly do the following procedure. Now dismantle the scanner section and apply a

...white flat ribbon cables off the main circuit board. 4- Plug in power source and turn printer on. Wait till you get a error message and push "Ok". 5- Unplug power source. 6- Reconnect the flat ribbon ...

showing massage L4 on screen & machine not start Check the main motor and the flat cable.