...Ink Pad/Pads" with a new one/ones and then reset the "Internal Waste Ink Pad Counter". The waste ink pads are normally housed in a black plastic box. They are located in the bottom of the printer, ...
...Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace ...
Question about Epson Stylus Office Equipment & Supplies
...Ink Ink Pad Error and usually your remedy is to replace the waste ink pad/pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace ...
Question about Epson Stylus Office Equipment & Supplies
ink pad replacement (approximately $100) or buy a new printer ( $150 - $250). After completing your suggested RESET procedure successfully - I went a step further and mopped up the excess ink that was
Question about Epson Stylus Office Equipment & Supplies
...Ink Ink Pad Error and normally your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace ...
...Ink Pad/Pads with a new one/ones and then reset the InternalWaste Ink Pad Counter. If you just reset the counter and don't replacethe pads, then your printers old pads will eventually overflow ...
...reset the counter at the link below. http://www.epson.com/cgi-bin/Store/support/InkPadsForm.jsp The reason the service message pops up is that it is telling you that the waste ink pads are near the ...
Question about Epson Stylus Office Equipment & Supplies
...ink pad and reset chip hi i have an epson rx650 its telling me parts in my printer need replacing and service. i looked in my book it says the inkpad deeds replacing also chip needs to be reset. can ...
Question about Epson Stylus Office Equipment & Supplies
...ink pad is replaced with a new one, and the waste ink counter in EEPROM is reset by the service operation. "try in this procedure 1. hold and press ink and roll button then press power on. 2. Red Led ...
...ink to the waste pad. Use a piece of coathanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel. Find yourself a suitable container ...
788 questions posted
Usually answered in minutes!
1,911 Questions
510 Questions
454 Questions
438 Questions
438 Questions